Crown GLM-100 Microphone

Crown
Product Code: CROGLM100

List Price: $376.05 Our Price: $327.00

Crown GLM-100 Microphone

The GLM-100 is a miniature omnidirectional condenser microphone for clipping onto instruments.

20-20 kHz response and XLR connector. Specifications: Type: Miniature electret condenser S/N ratio: 66 dB at 94 dB SPL Frequency reponse:20...20000 Hz Maximum SPL: 150 dB SPL for 3% THD Directional characteristics: Omnidirectional Current drain: 1.1 mA Equivalent noise level : 28 dB SPL typical (0 dB=0.0002 dyne/cm2, A Weighted) Operating Voltage: 12 to 48 volts DC, positive voltage on pins 2 and 3 with respect to pin 1 of output connector (standard simplex phantom-powering configuration) Sensitivity: -72 dB re 1 V/Pa (-72 dBV output for 74 dB SPL input) Power level: -50 dB re 1 mV/10 dynes/cm2.

EIA sensitivity: -144 dB Weight: 2.8 oz. (including cable and connector) Impedance: 150 ohm rated (240 ohms actual), balanced Finish: Black Minimum Load Impedance: 1000 ohms Cable: 8-foot, black, permanently attached cable with rugged strain/flex relief and switchcraft A#M connector Free shipping / No Sales Tax. We'll beat any price! 100% Satisfaction Guarantee. 30 Day Return Policy.

Crown GLM-100 Microphone

The GLM-100 is a miniature omnidirectional condenser microphone for clipping onto instruments. 20-20 kHz response and XLR connector. Specifications: Type: Miniature electret condenser S/N ratio: 66 dB at 94 dB SPL Frequency reponse:20...20000 Hz Maximum SPL: 150 dB SPL for 3% THD Directional characteristics: Omnidirectional Current drain: 1.1 mA Equivalent noise level : 28 dB SPL typical (0 dB=0.0002 dyne/cm2, A Weighted) Operating Voltage: 12 to 48 volts DC, positive voltage on pins 2 and 3 with respect to pin 1 of output connector (standard simplex phantom-powering configuration) Sensitivity: -72 dB re 1 V/Pa (-72 dBV output for 74 dB SPL input) Power level: -50 dB re 1 mV/10 dynes/cm2.

EIA sensitivity: -144 dB Weight: 2.8 oz. (including cable and connector) Impedance: 150 ohm rated (240 ohms actual), balanced Finish: Black Minimum Load Impedance: 1000 ohms Cable: 8-foot, black, permanently attached cable with rugged strain/flex relief and switchcraft A#M connector