AKG C535EB Condenser Vocal Microphone
AKG
Product Code: AKGC535EB
|
List Price: $274.85
Our Price: $239.00
|
|
|
The C 535 EB has the clean, open characteristic of AKGs best studio condensers, enhanced by a 2dB rise between 7 and 12kHz to project vocals in front of the mix.
An integral four-position switch tailors output level and bass roll-off for a variety of uses. A sharp LF cut at the full output level reduces pops and handling noise in vocal applications, while a more gradual roll-off at the reduced output is ideal for most instrument applications. The C 535 EB requires 9û52 V phantom power. Polar pattern: cardioid Frequency range: 20û20,000 Hz Sensitivity: 7 mV/Pa = 0.7 mV/¦bar (-63 dBV, re 1 ¦bar) Max. SPL for 1 % THD: 80 Pa = 130 dB SPL Equivalent noise level: 32.4 dB (to DIN 45 412) Signal/noise ratio (A-weighted): 21 dB (A) Preattenuation pad: -14 dB Bass cut filter: 12 dB/octave at 100 Hz Electrical impedance: 200 ohm Recommended load impedance: =600 ohm Power requirement: 9 to 52 volts to DIN 45 596 Current consumption: approx.
1 mA Connector: 3-pin male XLR Finish: matte black Size: head diameter: 46 mm (1-13/16 in.), length: 184 mm (7-1/4 in.) Net/shipping weight: 300/800 g (10.6/28.3 oz.) Standard accessories: SA 41/1 stand adapter Optional accessories: W 23 pop/windscreen, B 18Free shipping / No Sales Tax. We'll beat any price! 100% Satisfaction Guarantee. 30 Day Return Policy. The C 535 EB has the clean, open characteristic of AKGs best studio condensers, enhanced by a 2dB rise between 7 and 12kHz to project vocals in front of the mix. An integral four-position switch tailors output level and bass roll-off for a variety of uses. A sharp LF cut at the full output level reduces pops and handling noise in vocal applications, while a more gradual roll-off at the reduced output is ideal for most instrument applications. The C 535 EB requires 9û52 V phantom power. Polar pattern: cardioid Frequency range: 20û20,000 Hz Sensitivity: 7 mV/Pa = 0.7 mV/¦bar (-63 dBV, re 1 ¦bar) Max.
SPL for 1 % THD: 80 Pa = 130 dB SPL Equivalent noise level: 32.4 dB (to DIN 45 412) Signal/noise ratio (A-weighted): 21 dB (A) Preattenuation pad: -14 dB Bass cut filter: 12 dB/octave at 100 Hz Electrical impedance: 200 ohm Recommended load impedance: =600 ohm Power requirement: 9 to 52 volts to DIN 45 596 Current consumption: approx. 1 mA Connector: 3-pin male XLR Finish: matte black Size: head diameter: 46 mm (1-13/16 in.), length: 184 mm (7-1/4 in.) Net/shipping weight: 300/800 g (10.6/28.3 oz.) Standard accessories: SA 41/1 stand adapter Optional accessories: W 23 pop/windscreen, B 18
